General Parameters - Roth EnergyLogic Touchline/wireless User Manual

User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
9.3.3 P-20 "General parameters"
Parameter
P-21
P-22
P-23
82
For the following parameter descriptions the relevant parameter was already
selected. The display shows P-xx.
Description
Show software-version of wireless room thermostat.
Operation
►
Press sensor button
►
Press sensor button
Show software-version of wireless connection module
Operation
►
Press sensor button
►
Press sensor button
Show actual status of wireless connection module and I/O-Box.
●
Options
–
0: no errors detected.
–
1: Alarm wireless connection module, TB-input active
–
2: Alarm external signal I/O-Box
–
3: Error wireless connection module and I/O-Box
Operation
►
Press sensor button
detected, then 1, 2 or 3 and the warning symbol
►
Press sensor button
. The display shows the Software-Version.
. The display shows P-22.
. The display shows the Software-Version.
. The display shows P-23.
. The display shows 0 if no error is detected. If an error is
. The display shows P-24.
are shown.
P100011294 E