Address Several Wireless Room Thermostats To One Radio Channel (Sensor Mode) - Roth EnergyLogic Touchline/wireless User Manual

7.1.3 Address several wireless room thermostats to one radio channel
(sensor mode)
NOTE
Activate sensor mode
Deactivate sensor mode
Example
Address the first wireless
room thermostat
P100011294 E
When several wireless room thermostats in sensor mode are addressed to
one channel, then all actual measured temperatures will be used to calculate
the average room temperature.
Before addressing more than one wireless room thermostats to one radio
channel, the additional wireless room thermostats have to be set into sen-
sor mode.
In addition to one wireless room thermostat it is possible to add up to five
wireless room thermostats in sensor mode.
When a wireless room thermostat will be addressed to a radio channel that
is addressed already with another wireless room thermostat, then the ad-
dress of the firstly addressed wireless room thermostat will be overwritten.
With parameter P-24 it is possible to put a wireless room thermostat back

to factory settings.
page 83.
►
Press the sensor buttons
10 seconds simultaneously.
►
Press the sensor buttons
10 seconds simultaneously.
Assign several wireless room thermostats to radio channel CH 1 for average
temperature building.
►
Assign the first wireless room thermostat to a radio channel in accordance
with chapter 7.1.1.  See page 52, chapter 7.1.1.
User Manual Roth EnergyLogic Touchline/Wireless
Commissioning and operation
See parameter description P-24, Option "4",
und of the wireless room thermostat for
+
10 s
und of the wireless room thermostat for
+
10 s
53