Roth EnergyLogic Touchline/wireless User Manual page 69

Time program Pro1 –
change first switched-on
period
Set second switched-on
period
Set third switched-on
period
NOTE
P100011294 E
Time program Pro1 is selected. The factory settings need to be changed.
►
Press sensor button
point for "reduced to normal". Time 06:00 blinks. Symbol
►
Press sensor button
shows the time of the first switching point "normal to reduced". Time 23:00
blinks. Symbol is shown.
►
Press sensor button
►
Press sensor button
The time for the first switching point "reduced to normal" has not been
changed. The time for the first switching point "normal to reduced" has been
changed to 09:00.
►
The display shows the message OFF. The second switched-on period is
not used.
►
Press sensor button
The time for the second switching point "reduced to normal" has been set at
16:00. Symbol is shown.
►
Press sensor button
ing point "normal to reduced". Time 16:00 blinks. Symbol
►
Press sensor button
►
Press sensor button
period.
The time for the second switching point "normal to reduced" has been set at
23:00. Symbol is shown.
The second switched-on period must first be set in time program Pro1 in
order to enable the message OFF of the third switched-on period. If the
second switched-on period is not set, the message OFF is not shown.
►
The display shows the message OFF. The third switched-on period is not
used.
►
Select one of the following options:
– Press sensor button
duced to normal". As the last switching point of the second switched-on
period is set at 23:00, the time of the third switching points "reduced to
normal" and "normal to reduced" have to be set between 23:00 and
24:00. Otherwise the second switched-on period has to be shifted.
– Press sensor button
and all working days
User Manual Roth EnergyLogic Touchline/Wireless
Commissioning and operation
. The display shows the time of the first switching
to confirm the default time 06:00. The display
, to set the new time at 09:00.
, to save the changes of the first switch-on period.
, to set the new time at 16:00.
. The display shows the time of the second switch-
, to set the new time at 22:00.
, to save the changes of the second switch-on
, to set the time of the third switching point "re-
. The display shows Pro2. Symbol
are shown.
1 2 3 4 5
is shown.
is shown.
blinks
69