Parameters For Individual Wireless Room Thermostats - Roth EnergyLogic Touchline/wireless User Manual

Parameter
P-38
Table 17: Service menu –P-30 "Parameters for all wireless room thermostats"
9.3.5 P-40 "Parameters for individual wireless room thermostats"
Parameter
P-41
P100011294 E
Description
Deactivate or activate automatic time settings.
NOTE
Only for LAN- versions with active internet connection: The wireless connection
module can get the current time from the internet to keep the date and time up to
date.
●
Factory settings: Option "0" for wireless connection modules with LAN-interface
●
Options:
–
0: activate
–
1: deactivate
Operation
►
Press the sensor button
►
Press the sensor button
►
Perform one of the following steps:
–
Press the sensor button
parameter P-31.
–
Press the sensor button
lected parameter again.
►
Press the sensor button
Description
Set wall temperature correction of wireless room thermostat.
The compensated temperature will be shown at the display as actual value.
●
Factory settings: 0 K
●
Setting range: –3...+3 K
●
Increment: 0.1 K
Operation
►
Press sensor button
►
Press sensor button
►
Select one of the following options:
–
Press sensor button
next parameter P-42.
–
Press sensor button
lected parameter.
User Manual Roth EnergyLogic Touchline/Wireless
. The display shows 1.
or to select the option 0 or 1.
to save your change. The display shows the next
to cancel the process. The display shows the se-
. The display shows P-30.
. The display shows 0.
or , to change the value.
, to save the changed settings. The display shows the
, to interrupt the procedure. The display shows the se-
Parameter descriptions
87