Roth EnergyLogic Touchline/wireless User Manual page 79

Parameter
P-06
P-07
P-08
P-09
P100011294 E
Description
Set display for stand-by-mode. (max. battery saving mode)
To minimize battery consumption the display can be switched off in stand-by- mode.
Only the symbol "low battery" will be shown when applicable.
•
Factory settings: option "On"
•
Options
–
On: normal, as defined with parameter P-01.
–
Off: no symbols are shown (max. battery saving mode)
Operation
►
Press sensor button
►
Press sensor button
►
Press sensor button
Activate or deactivate sound of sensor button.
•
Factory settings: Option "On"
•
Options
–
On: activate
–
OFF: deactivate
Operation
►
Press sensor button
►
Press sensor button
►
Press sensor button
Show ID-number of wireless room thermostat.
This ID-Number is needed to configure a smart phone web-application!
Operation
►
Press sensor button
►
Press sensor button
Show ID-number of wireless connection module.
This ID-Number is needed to configure a smart phone web-application!
Operation
►
Press sensor button
►
Press sensor button
User Manual Roth EnergyLogic Touchline/Wireless
. The display shows shortly diSP and then On.
or , to select option On or OFF.
to confirm selection. The display shows P-07.
. The display shows On.
or , to select option On or OFF.
to confirm selection. The display shows P-08.
. The display shows the ID-number.
. The display shows P-09.
. The display shows the ID-number.
. The display shows P-10.
Parameter descriptions
79