Factory Settings Parameters - Roth EnergyLogic Touchline/wireless User Manual

User Manual Roth EnergyLogic Touchline/Wireless
Plant examples and communication

Factory settings parameters

User menu
Parameter Description
P-01 Set display in stand-by-mode: actual value or time.
P-02 Set setpoint for the minimal floor temperature.
(only for versions with integrated IR-sensor)
P-03 Set upper and lower limits for room temperature setpoint.
P-04 Change time programs.
P-05 Reset time programs to factory settings.
P-06 Set display for stand-by-mode. (max. battery saving mode)
P-07 Activate or deactivate sound of sensor button.
P-08 Show ID-number of wireless room thermostat
P-09 Show ID-number of wireless connection module
P-10 Function for sensor button
Service menu
Parameter Description
P-SE Access only with service code, factory settings "1234"
P-21 Show software-version of wireless room thermostat
P-22 Show software-version of wireless connection module
P-23 Show actual status of wireless connection module and I/O-
Box
P-24 Reset parameter to factory settings.
Parameter Description
P-31 Set increment for room temperature setpoint adjustment.
P-32 Set temperature for frost protection function.
P-33 Set unit for temperature.
P-34 Set dead-zone for change-over between heating and cool-
ing.
P-35 Change service code for service menu.
P-36 Change access code for public spaces.
P-37 Activate or deactivate "summer-/wintertime".
P-38 Deactivate or activate automatic time settings.
132
We recommend that you enter your settings in the following tables, e.g. for
reset. After a reset of the radio connection module, all settings are reset to
factory settings.
parameterisation.
Factory settings New
Room temperature
15 °C
30 °C / 5 °C
–
–
On
On
–
–
P-9H
Factory settings New
–
–
–
–
–
Factory settings New
0: 0.5 K
8.0 °C
0: °C
0: 2 K
1234
1234
0: activated
1: activated
P100011294 E