Reset Time Programs To Factory Settings - Roth EnergyLogic Touchline/wireless User Manual

User Manual Roth EnergyLogic Touchline/Wireless
Commissioning and operation
Time program Pro2
Time program Pro3
NOTE
7.6.5

Reset time programs to factory settings

70
►
Select one of the following options:
– Press sensor button
program Pro3.
– Press sensor button
shows P-04.
– Press sensor button
►
After pressing the sensor button
working days
1 2
►
Set all switching points of the desired switched-on periods for the working
days as described for Pro1.
►
Repeat this procedure for the weekend. The display shows the symbol for
the weekend .
6 7
Time program Pro2 has be set.
►
Procedure as described for time program Pro 2.
With time program Pro3 all switching points of the desired switched-on peri-
ods are set per individual day of the week.
To remove a switched-on period set the time of both switching points at the
same value. First remove the third switched-on period, then the second
switched-on period. When the second of three switched-on periods is re-
moved, then also the third is deleted.
Please note that if sensor buttons are not pressed for more than one mi-
nute the wireless room thermostat return to its battery saving mode before
the time program is completed.
The three time programs can be reset to factory settings individually with
parameter P-05.
, to skip time program Pro2 and to go to time
, to leave the time program Pro2. The display
, to configure time program Pro2.
, the display shows the symbol for
.
3 4 5
P100011294 E