Roth EnergyLogic Touchline/wireless User Manual page 27

Symbols
P100011294 E
Sensor buttons Description
Change time and date.
10 s:
Cancel
●
5 s:
+
●
5 s: Disable/enable operation (key-lock)
+
+ Activate/deactivate sensor mode
10 s:
Specify duration for which this sensor button is occupied with
2 s:
a specific function. This function is parameterised via the
parameter P-10.
You can choose between the following functions with the
parameters P-10:
●
●
●
If a different function than the function "heating or cooling
5 s:
priority" is set for the parameter P-10, you may still set the
function "heating or cooling priority" by pressing the sensor
button
Table 6: Sensor buttons wireless room thermostat
Symbols Description
Battery nearly empty
Relative energy consumption
Dew-point alarm (only when dew-point sensor is connected)
Window contact (only with accessory)
Wireless signal
Loss of wireless connection
General alarm
Operation disabled
Working days
Weekend
●
●
°C
Actual temperature
Room temperature
User Manual Roth EnergyLogic Touchline/Wireless
Addressing
Test addressing.
Option "P-9H": Time-bound priorities for the function
"Heating or cooling" for the set duration (h) (party func-
tion).
Option "H-C": Direct switching between heating/cooling
and display of room temperature.
Further option: Direct display of the floor temperature (for
wireless room thermostats with IR only)
for 5 seconds.
Time and date
Time program
Design and function
27