Roth EnergyLogic Touchline/wireless User Manual page 83

Parameter
P-24
Table 16: Service menu – P-20 "General parameter"
P100011294 E
Description
Reset parameter to factory settings.
Parameters are partly stored in the wireless connection module and partly in the
wireless room thermostat.
●
Options
–
0: Not active, no reset will be executed.
–
1: Reset wireless connection module to factory settings. The addressing of
wireless room thermostat and wireless connection module will not be delet-
ed.
–
2: Reset wireless connection module to factory settings. The addressing of
wireless room thermostats, wireless connection module and accessories will
be deleted.
–
3: Reset wireless room thermostat to factory settings. The addressing of a
wireless room thermostat or temperature sensor (sensor mode) will not be
deleted.
–
4: Reset wireless room thermostat to factory settings. The addressing of
wireless room thermostat or temperature sensor (sensor mode) will be delet-
ed.
Operation
►
Press sensor button
►
Press sensor button
►
Press sensor button
►
Press sensor button
►
Select one of the following options:
–
Press sensor button
next parameter P-21.
–
Press sensor button
lected parameter.
User Manual Roth EnergyLogic Touchline/Wireless
. The display shows 0.
or , to select an option.
. The display shows no.
or , to select between options no or yes.
, to save the changed settings. The display shows the
, to interrupt the procedure. The display shows the se-
Parameter descriptions
83