Setting Up The Ethernet - Satec expertmeter EM720 Operation Manual

Chapter 5 Configuring the EM720

Setting Up the Ethernet

62
Using the Front Display
Select Net from the main menu. See
Setup Options in Chapter 3 for information on navigating in
menus.
See the table below for available network options.
Using PAS
Select Communications Setup from the Meter Setup menu,
and then click on the Network Setup tab.
The following table lists available network options.
Display Label
IP Address
Subnet Mask
Def. Gateway
NOTE
When you change the device network settings through the
Ethernet port, the device port restarts so communication will
be temporarily lost. You may need to wait some additional
time until PAS restores a connection with your device.
EM720 Power Quality and Revenue Meter
Configuring Communications
Viewing and Changing
Parameter
Device IP Address
Network Subnet Mask
Network Default Gateway
Default
192.168.0.203
255.255.255.0
192.168.0.1