Setting-Up Dial-Up Gprs Network - Satec expertmeter EM720 Operation Manual

Chapter 5 Configuring the EM720

Setting-Up Dial-Up GPRS Network

IP Address
Network Subnet
Mask
Network Default
Gateway
Redial Attempts
Connection Timeout
Time Between Redial
Attempts
Idle Time Before
Hanging Up
Rings before Answer
Modem Initialization
EM720 Power Quality and Revenue Meter
Select Communications Setup from the Meter Setup menu,
and then click on the Dial-Up Networking Setup tab.
The following table lists available connection options.
Parameter Options
0-1000,
0 = forever
0-9999 sec
0-9999 sec
0-9999 sec
0 = never
0-99
0 = never
Configuring Communications
Default
Connection Options
192.168.10.203 The IP address on the dial-in
modem PPP network. Not used in
a GPRS network.
255.255.0.0 The PPP/GPRS network subnet
mask
192.168.10.204 The PPP network default gateway.
Not used in a GPRS network.
0 The number of dial attempts to
connect to a remote modem if a
connection was unsuccessful.
120 The modem cancels a call if not
connected within the connection
timeout time.
60 A time delay between redials.
0 The modem disconnects a call if
idle for more than the specified
idle time.
0 The number of rings before the
modem answers an incoming call
from a remote modem. Not used
in a GPRS network.
AT&F&D1&C1 Default modem initialisation
string. Do not change.
Description
63