Oracle SPARC S7-2 Service Manual page 150

Reconnect Data Cables and Power Cords
2. Reconnect the power cables to the power supplies and secure them with the
reclosable straps.
3. If necessary, reinstall the cables into the CMA and secure them with the
reclosable cable straps.
If you pulled the server out of the rack to make it easier to connect the cables,
4.
push the server into the rack until the slide rail locks (on the front of the server)
engage the slide rail assemblies.
You will hear an audible click when the server is in the normal rack position.
Related Information
"Return the Server to the Normal Operating Position" on page 147
■
"Power On the Server" on page 151
■
150 SPARC S7-2 Server Service Manual • March 2017