Oracle SPARC S7-2 Service Manual page 64

Remove a Fan Module
a. Using your thumb and forefinger, grasp the fan module in the finger
recesses located in the plastic between the fans.
b. Lift the fan module straight up and out of the chassis.
Caution -
can cause damage to the motherboard connectors.
6. Set the fan module aside.
Caution -
shut down and the power cords are removed.
Consider your next step:
7.
If you removed the fan assembly as part of another procedure, return to that procedure.
■
Otherwise, continue to
■
64 SPARC S7-2 Server Service Manual • March 2017
When removing a fan module, do not rock it back and forth. Rocking a fan module
Do not service any other components in the fan compartment unless the system is
"Install a Fan Module" on page 65.