Power On The Server - Oracle SPARC S7-2 Service Manual

Power On the Server

As soon as the power cords are connected, standby power is applied and the green Power status
indicator on the server front panel blinks. Depending on the configuration of the firmware, the
system might boot. If it does not boot, follow this procedure.
Power on the server by one of these methods.
Press the Power button on the server front panel.
■
Log in to the Oracle ILOM web interface, click Host Management → Power Control and
■
select Power On from the Select Action list.
Log in to the Oracle ILOM CLI, and type this command at the Oracle ILOM prompt:
■
->start /System
When the server is powered on and the power-on self-test (POST) code checkpoint tests have
completed, the green Power status indicator on the front panel lights and remains lit.
Related Information
"Power Off the Server" on page 38
■
"Reconnect Data Cables and Power Cords" on page 149
■
Power On the Server
Returning the Server to Operation 151