Oracle SPARC S7-2 Service Manual page 71

For instructions for disconnecting the CMA left-side connectors, see
Management Arm" on page
Caution - When disconnecting the CMA left-side connectors, use your arm to support the
CMA so that it does not hang down under its own weight and stress the right-side connectors;
otherwise, the CMA might be damaged. You must continue to support the CMA until you have
reconnected both of the left-side connectors.
4. Disconnect the power cord from the faulty power supply.
5. Grasp the power supply handle and push the power supply latch to the left (1).
No. Description
1 Power supply 0
2 Power supply 1
6. Pull the power supply out of the chassis (2).
7. Replace the power supply immediately.
See "Install a Power Supply" on page
Caution - Replace the power supply within 5 minutes to ensure proper system cooling.
42.
72.
Remove a Power Supply
"Remove the Cable
Servicing Power Supplies 71