Table of Contents
Advertisement
Rackmounting the Server
Rackmounting the Server
To rackmount the server, stabilize the rack, and install the slide rails and mounting brackets.
Then, install the server into the rack.
Stabilize the Rack
Caution -
bar before you install the server.
Refer to your rack documentation for detailed instructions for the following steps.
1.
Open and remove the front and back doors from the rack cabinet, only if they
impinge on the mounting bay.
2.
To prevent the rack cabinet from tipping during the installation, fully extend the
rack cabinet anti-tilt bar, which is located at the bottom front of the rack cabinet.
If the rack includes leveling feet beneath the rack cabinet to prevent it from
3.
rolling, extend these leveling feet fully downward to the floor.
Related Information
"Safety Precautions" on page 39
■
"Preparing for Server Installation" on page 13
■
Rack cabinet documentation
■
Install Mounting Brackets on the Server
To install the mounting brackets on the sides of the server:
44
Oracle Servers X7-2 and X7-2L Installation Guide • October 2017
To reduce the risk of personal injury, stabilize the rack cabinet, and extend the anti-tilt
Advertisement
Table of Contents
Troubleshooting
