List Of Warning Icons - SATO PW208NX Operator's Manual

Troubleshooting

3.3 List of Warning Icons

The warning icons are displayed in order of detecting.
Warning Icons
138
Mobile printer PW208NX/PW208mNX
Description
To clear an error
Receive buffer 1) Free space in the receive
near full buffer is little.
--
Command error 1) A command error is detected.
If the next item is
received or the job
canceled, the warning
icon is cleared.
Head error 1) A head error is detected.
--
1) An IP address is not obtained
IP address not
properly either in IPv4 or
obtained (PW208NX
IPv6. (DHC server stops or
only: Wireless LAN
other problem exists.)
model)
Authentication chip 1) Authentication with iOS was
error interrupted.
--
Authentication chip 1) Bluetooth connection with
malfunction iOS cannot be established
because of mulfunction in
--
authentication chip.
Causes
1) Do not send the next data
until printing the data finishes
on the printer.
1) Check the print data.
1) Contact your SATO reseller
or technical support center.
The print head should be
replaced.
1) Perform Network connection
and Network Settings again.
When Network Settings are
displayed properly, restart the
printer.
1) Wait for the icon to disappear
for a while (approximately 130
seconds), and then perform
Authentication with iOS again.
During the authentication with
iOS in process, do not power
off the printer or remove the
battery.
1) Contact your SATO reseller or
technical support center.
Countermeasures