Warning Message - SATO HR2 Series Operator's Manual

5.1 ERROR SIGNAL TROUBLESHOOTING (Cont'd)

5.1.3 Warning Message

Note that the printer will continue issuing label while detecting a warning message.
No. WARNING DISPLAY
01 BUFFER NEAR FULL
02 COMMAND ERROR
03
HEAD ERROR
HR2 Series Operator Manual
LED BUZZER
STATUS: - 1) Free space for receive
On
ERROR: To clear error: Cancel print
Off operation or Data to create
more than 1.95MB free space
in receive buffer
STATUS: 1 short 1) Detecting improper com-
On Beep
ERROR: 2) Print data is outside the
Off
• This screen appears only
To clear error: Normal data
reception
STATUS: - 1) This message will be dis-
On
ERROR:
Off
To clear error: Power Off
(Print head replacement)
ERROR CONDITION
buffer is low.
mand in print data.
printable area.
when command error dis-
play is disabled in
Advanced Mode.
played after detecting and
clearing an electrical dis-
connection error of print
head temporarily with the
FEED button.
Section 5: Troubleshooting
CORRECTIVE ACTION
1) Cancel print operation or data
to create more than 1.95MB free
space in receive buffer to clear
an error.
1) Check data
2) Adjust print data and base
reference point offset not to
exceed the printable area.
1) Print head replacement
Page 5-7