SATO PW208NX Operator's Manual page 9

Safety Precautions
■ Print head
• The print head is hot after printing. Be careful not to get burned when replacing media or
• Touching the edge of the print head with bare hands could result in injury. Be careful not to
• The customer should not replace the print head. Doing so could result in injury, burns or
6
Mobile printer PW208NX/PW208mNX
cleaning immediately after printing.
become injured when replacing media or cleaning.
electric shock.
■ Do not place in areas with high humidity
• Do not place the product in areas with high humidity or where condensation forms.
If condensation forms, immediately turn off the power switch and do not use the
product until it dries. Using the product while condensation is on it could result in
electric shock.
■ Power supply
• An AC adapter may become hot. Be careful not to get burned.
• An AC adapter (Optional) is exclusive for this product. It must not be used with any other
electric device.
• When disconnecting an AC adapter from the outlet, be sure to grip it by the plug. Pulling on
the cord may expose or break the wires and possibly cause fire or electric shock.
• Do not put an AC adapter near a hot device. Leaving an AC adapter near a hot device could
cause the adapter's housing to melt and possibly cause fire or electric shock.
■ Power cord and cable
• When disconnecting a power cord or cable from the outlet, be sure to grip it by the
plug. Pulling on the cord or cable may expose or break the wires and possibly cause
fire or electric shock.
• Do not put a power cord or cable near a hot device. Leaving a power cord or cable near a hot
device could cause the cord's or cable's housing to melt and possibly cause fire or electric
shock.
■ Handling an AC adapter (Optional) when moving
• On the occasion of carrying, first disconnect an AC adapter from the outlet. If an AC adapter
is not disconnected, it may be damaged, which may cause a fire or electric shock.
WARNING
CAUTION