SATO PW208NX Operator's Manual page 59

Starting Up the Printer
Advanced
Printing > Advanced
To set detailed sensor operation and print motion, the setting items are as follows:
1 Calibrate
2 Head Check
3 Head Chk Mode
4 Every Page
5 Chk Media size
6 Adjustments
7 Start Online
8 Feed After Error
9 Feed At P-On
10 Finisher Feed
11 Paper End
(PW208NX only)
12 Prioritize
13 Reprint
Print End Pos.
14
(Print End Position)
15 Dispenser Mode
56
Mobile printer PW208NX/PW208mNX
Set the media sensor adjustments.
Set the head check operation.
Set the head check method. This item is displayed
only if Head Check is set to All or Barcode.
Set the interval to perform head check by specifying
the number of media. This item is displayed only if
Head Chk Mode is set to Every Page.
Enable or disable media size check. This item is
displayed only if Sensor Type is set to Gap or I-Mark.
Adjust the offset, print position and print darkness.
Set the status when the printer starts.
Set whether the media roll is to be fed by one sheet
and switches automatically to the printing (online)
screen when the printer recovers from an error.
Set whether the media roll is to be fed by one sheet
when the printer starts.
Set the length to feed after printing in the tear-off or
Dispenser mode.
Select the sensor for detecting the paper end.
Set which takes priority, printer setting or command
setting.
Enable or disable the reprint function.
Set the print end position of media.
Set the dispenser motion.