SATO PW208NX Operator's Manual page 124

Main
Information > Sensor Module > Main
Shows the information about the main firmware of this printer as follows:
1 Name Shows the Main firmware name.
2 Release Date Shows the Main firmware release date.
3 Checksum Shows the Main firmware checksum.
Counters
Information > Counters
Shows the counter information of this printer as follows:
1 Print head Shows the head counter information of this printer.
Head
Information > Counters > Head
Shows the head counter information of this printer.
1 Life Shows the current print distance.
2 Head 1 Head 1 shows the current print distance.
When you replace the print head, the head counter of
3 Head 2
Head 1 is transferred to Head 2 and Head 1 starts to
4 Head 3
count from 0 again.
Active printing
Information > Active Printing
Shows the setting information of the active printing operations as follows:
1 Print Mode Shows the current Print Mode.
2 Sensor Type Shows the type of media pitch sensor being used.
Wi-Fi Direct
Information > Wi-Fi Direct
Shows the connection information of the Wi-Fi Direct only if the printer is connected to
the Wi-Fi Direct.
1 SSID
2 Role
3 Device Address
4 IP Address
5 Passphrase
Shows the SSID.
Shows the Wi-Fi Direct connection status with the
following item:
GO: Group Owner
Shows the device address.
Shows the IP Address.
Shows the passphrase.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
121