SATO PW208NX Operator's Manual page 56

Sensor Type
Printing > Sensor Type
Set the type of media pitch sensor to be used.
Initial setting : I-Mark
Setting options : None, I-Mark, Gap (PW208NX only: In Tear-Off or Continuous
print mode)
I-Mark : Use the reflective type sensor to detect the reference position
(I-mark) on the media.
Gap: Use the transmissive type sensor to detect the reference position
(gap) on the media.
None: Disable the media pitch sensor.
Peeling Setting (PW208NX only)
Printing > Peeling Setting
To make settings for peeling motion, following setting items are available.
1 Backfeed
2 Sensor Type
Backfeed (PW208NX only)
Printing > Peeling Setting > Backfeed
Set the backfeed motion in the Dispenser mode.
Initial setting : Before
Setting options : None, Before, After
None : The printer does not backfeed after printing and dispensing the media.
Before : Before printing, the printer performs backfeed motion to align the
front part of media with the print head position.
: The printer performs backfeed motion to align the front part of
After
the next media with the print head position after printing and
dispensing the media.
Sensor Type (PW208NX only)
Printing > Peeling Setting > Sensor Type
Set the type of media pitch sensor to be used in the Dispenser mode.
Initial setting : I-Mark
Setting options : Gap, I-Mark
I-Mark : Use the reflective type sensor to detect the reference position
(I-mark) on the media.
Gap : Use the transmissive type sensor to detect the reference position
(gap) on the media.
Set the backfeed motion in the Dispenser mode.
Set the type of media pitch sensor to be used in the
Dispenser mode.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
53