SATO PW208NX Operator's Manual page 117

Starting Up the Printer
HEX-Dump
Tools > HEX-Dump
To save the received buffer data, the setting items are as follows:
1 Hex Dump
Mode
2 Buffer Dump
3 Log Files
Hex Dump Mode
Tools > HEX-Dump > Hex Dump Mode
Enable or disable the Hex Dump mode.
If you set the Hex Dump mode to Enabled, the printer prints the received data and at
the same time creates a file of the received data inside hexdump/.
Initial setting
Setting options : Enabled, Disabled
Notes
• If you set the Hex Dump mode to Enabled, HEX is added to the status
icons.
• You can save a maximum of ten received data files for each type of
interface. Depending on the file size, the number of files you can save is
less than ten.
• The details of the files created inside hexdump/ are as follows:
• BT00xx.bin: Received data through Bluetooth.
• WIFI00xx.bin: Received data through wireless LAN.
• USB00xx.bin: Received data through USB.
• When the received data size reaches to 1024 KB or the status without
receiving data lasts for 60 seconds, the file is saved.
• You can print or delete files from the Log Files menu.
114
Mobile printer PW208NX/PW208mNX
Enable or disable the Hex Dump mode.
Save the received buffer data to the printer.
Manage the log files of the received data created in the HEX-
Dump mode and Buffer Dump.
: Disabled