SATO PW208NX Operator's Manual page 110

Change Pwd
System > Password > Change Pwd
Change the password.
You can enter 4 to 32 digits numbers only.
Setting options : admin, manager, level1
Notes
• The admin and manager passwords are for factory and maintenance
personnel. You cannot change these passwords.
• The default value for level1 is 0310.
Reset Passwords
If you have forgotten the customized password, you can reset it back to the
default password.
1. Power off the printer, and then power on the printer.
2. When the SATO logo is displayed on the screen, press and hold the
button and button simultaneously, and then release the buttons when a
buzzer sounds.
3. All the passwords are reset to default passwords, and the normal screen is
displayed.
• The above procedures, as a temporary solution, allow users to access the
setting mode with the default password.
• After you access to the setting mode with the default password, set the
password again.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
107