Charging The Battery; Inserting The Battery - SATO PW208NX Operator's Manual

Before You Start

1.2 Charging the Battery

Before using the printer, use the following charging device to charge the supplied battery.
• AC adapter: "1.2.2 Charging with AC Adapter (Optional)"
• Charging cradle: "1.2.3 Charging with Charging Cradle (Optional)"
• Battery charger: "1.2.4 Charging with Battery Charger (Optional)"
• An AC adapter (Optional) and Charging cradle (Optional) are for this printer only. It must not be used
with any other electric device. If an AC adapter other than the specified one is connected to this printer, it
may cause a malfunction. Do not use it.
• If the battery has not been charged for a long period of time, it may become unusable. Charge the
battery regularly.

1.2.1 Inserting the Battery

Power off the printer before inserting or removing the battery.
1
Open the battery cover.
Slide the lever of the battery cover ().
Open the battery cover ().
2
Insert the battery.
Insert the battery from the metal side.
3
Close the cover.
Close the battery cover ().
Slide the lever of the battery cover with the
battery cover pressed shut ().
14 Mobile printer PW208NX/PW208mNX

( page 15)
(  page 15)

( page 18)
①
①
②
②