SATO PW208NX Operator's Manual page 103

Starting Up the Printer
Head Interval
System > Notifications > Clean Head > Head Interval
Set the notification interval about when the print head needs to be cleaned.
When the print distance after the counter is reset reaches to the set value, a status
icon for notifications is displayed.
You can change settings only if you have selected Enabled in the Clean Head >
Clean Head.
Initial value : 150 m
Setting range : 10 to 1000 m
Note
For details on notifications, see "3.4 Notifications"
Change Head
System > Notifications > Change Head
To notify when the print head needs to be replaced, the setting items are as follows:
1 Change Head
2 Head Interval
3 Head Counter
Change Head
System > Notifications > Change Head > Change Head
Enable or disable the notification function about when the print head needs to be
replaced.
Initial setting
Setting options : Enabled, Disabled
Enabled : Enable the notification function.
Disabled : Disable the notification function.
100
Mobile printer PW208NX/PW208mNX
Enable or disable the notification function about when the
print head needs to be replaced.
Set the notification interval about when the print head
needs to be replaced.
You can change settings only if you have selected
Enabled in the Change Platen > Change Platen.
Shows the current print distance.
You cannot change the setting.
: Disabled
( page 139).