SATO PW208NX Operator's Manual page 75

Starting Up the Printer
IPv6
Interface > Network > Settings > Wi-Fi > IPv6
To set IPv6 for the wireless LAN, the setting items are as follows:
This item is not displayed when Wi-Fi Direct is selected.
1 Mode
2 DHCP
3 IP Address
4 Prefix Length
5 Gateway
6 DNS
Mode
Interface > Network > Settings > Wi-Fi > IPv6 > Mode
Select the IP address assignment method.
Initial setting : Disable
Setting options : Disable , Auto, DHCP, Static
Disable
Auto
DHCP
Static
Prefix Length
Interface > Network > Settings > Wi-Fi > IPv6 > Prefix Length
If you have selected Auto or DHCP in the Mode menu, the prefix length is displayed.
If you have selected Static in the Mode menu, the prefix length is selected and set.
Initial value : 64
Setting range : 1 to 128
72
Mobile printer PW208NX/PW208mNX
Select the IP address assignment method.
You can press button to get the IP address from the
DHCP server.
When Mode is set to DHCP, the address is updated.
Shows the IP Address.
You cannot change the setting.
Display or set the prefix length.
If you have selected Static in the Mode menu, the prefix length
is selected and set.
Shows the default gateway address.
You cannot change the setting.
Shows the primary address of the DNS server.
You cannot change the setting.
: Disable the IPv6.
: Automatically generate the IP address and gateway
(stateless mode).
: Automatically retrieve the IP address, gateway and subnet
mask from the DHCP server.
: Shows the IP address and default gateway address.