SATO PW208NX Operator's Manual page 16

PW208NX
⑪
⑬
⑭
PW208mNX
⑪
⑭
 Platen roller (Consumables)
 Media sensors
 Media guide (PW208NX only)
 Cutter
 Print head (Consumables)
 Interface cover
* The platen roller feeds the label roll.
The print head prints on the label roll.
Perform maintenance regularly, as these parts are for printing.
• The cutter has the blade edge. Be careful not to get cut your finger.
ケガに注意
⑫
⑯
⑰
⑮
⑱
⑫
⑯
⑰
⑱
⑮
 DC input connector (AC power connector)
 USB connector
 NFC internal antenna
 Charging terminal for a Charging Cradle (Optional)
When the printer is shipped from the factory, a
black protective seal labeled "CRADLE ACCESS"
is affixed to the terminal. When using a cradle to
charge the printer, remove this seal.
(

Before You Start
⑲
⑲
page 141)
Mobile printer PW208NX/PW208mNX
Bottom
⑳
Bottom
⑳
13