SATO PW208NX Operator's Manual page 116

Paper Sensor
Tools > Test Print > Paper Sensor
To perform the Paper Sensor test print, the setting items are as follows:
1 Print
Perform the test print.
To stop the test print, press the
2 Label Length Set the length of one sheet of media used for the test print.
3 Pitch Adjust the print position.
4 Offset Adjust the stop position of media.
5 Darkness Adjust Fine tune the print darkness of the print.
Notes
• The values of Label Length, Pitch, Offset and Darkness Adjust set in
the Paper Sensor menu are reflected to the same item settings in the
BD Address menu, Factory menu, Configure List menu and Configure
QR menu.
• The values of Pitch, Offset and Darkness Adjust set in the Paper
Sensor menu are reflected to the same item settings in the Adjustment
mode ( page 63).
button.
Initial value : 800 dot
Setting range : 400 to 1600 dots
Initial value : 0 dot
Setting range : –30 to 30 dots
Initial value : 0 dot
Setting range : –30 to 30 dots
Initial value : 50
Setting range : 0 to 99 dots
Note
0 is the lightest and 99 is the darkest.
button or
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
113