SATO PW208NX Operator's Manual page 69

Starting Up the Printer
Prioritize
Printing > Advanced > Prioritize
Set which takes priority, printer setting or command setting.
Items for priority setting are print darkness, print speed, print offset, print mode and
sensor type.
Initial setting : Commands
Setting options : Settings, Commands
Settings : The printer's internal settings including the settings specified on
Commands : The printer settings according to the received data (commands)
Reprint
Printing > Advanced > Reprint
Assign the reprint function to the button.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled: Enable the reprint function.
Disabled: Disable the reprint function.
Note
The previous data is lost if you power off the printer.
Reprint function
If you have selected Enabled in Reprint, you can press the
printing (online) screen to print the previous data again. In case there is no print data,
the printer does not perform reprint.
Print End Pos. (Print End Position)
Printing > Advanced > Print End Pos.
Set the print end position of media.
Initial setting : 0 dot
Setting range : 0 to 8000 dots
Notes
• When the sensor type is set to None, the function of the print end position
becomes enabled.
• The media stops at the position of the print stop position added with the
value specified as the print end position.
66
Mobile printer PW208NX/PW208mNX
the printer's display take priority.
take priority.
button on the