SATO PW208NX Operator's Manual page 79

Starting Up the Printer
Start Group
Interface > Network > Settings > Wi-Fi > Wi-Fi Direct > Start Group
Use the grouping function to connect to a smartphone, tablet, or computer.
The setting procedures are as follows:
1. Select Start Group, and press the
2. Press the
tablet, or computer, or <new>, and then press the
3. From the Wi-Fi Direct setting items, check the IP Address and Passphrase settings
and take a note of them.
4. In the address of the browser of a smartphone, tablet, or computer you want to
connect, input the IP address and passphrase you checked in step 3.
5. Follow the instructions of the smartphone, tablet or computer, and then complete
the connection.
Notes
• You can connect to the maximum of 10 devices.
• When the group has been started, Start Group is not displayed.
When you disconnect the connection with Disconnect, Start Group
is displayed.
Button (PBC)
Interface > Network > Settings > Wi-Fi > Wi-Fi Direct> Button (PBC)
Set the wireless LAN connection using the push button method.
1. When "Press WPS button." is displayed on the screen, press the WPS button on
the access point of the wireless LAN device.
2. When the connection to the access point is established, "Connected with xxxxx"
appears on the screen.*
* : The name of the access point is displayed in "xxxxx ".
Note
If the connection to the access point is failed, "WPS timeout" appears
on the screen.
SSID
Interface > Network > Settings > Wi-Fi > SSID
Display or set the SSID.
Search and set the connectable devices.
If no connectable devices are found, SSID is displayed.
Initial setting : SATO_PRINTER (The printer's SSID is displayed.)
Setting options : Shows connectable devices.
76
Mobile printer PW208NX/PW208mNX
button.
button to select the group to which you want to add a smartphone,
button to decide the group.