Media Specifications - SATO PW208NX Operator's Manual

6.2 Media Specifications

Model Name
Media Type/Media Form
Media Size
PW208NX
Media Type : Roll (Face-out)
Dimension : Φ60 mm (2.4") maximum
Core : No
* Use only the supply products specified
by SATO.
Continuous
Length : 13 mm (0.5") to 160 mm (6.3")
(16 mm (0.6") to 163 mm
(6.4"))
Width : 25.4 mm (1.0") to 55 mm (2.2")*
(28.4 mm (1.1") to 58 mm
(2.3"))
*
When the Print Speed is set to
5 or 6 inch/sec, use the media
of 50 mm or wider.
Tear-off
Length : 16 mm (0.6") to 160 mm (6.3")
(19 mm (0.7") to 163 mm
(6.4"))
Width : 25.4 mm (1.0") to 55 mm (2.2")*
(28.4 mm (1.1") to 58 mm
(2.3"))
* When the Print Speed is set to
5 or 6 inch/sec, use the media
of 50 mm or wider.
Dispenser
Length : 25 mm (1.0") to 160 mm (6.3")
(28 mm (1.1") to 163 mm
(6.4"))
Width : 32 mm (1.3") to 55 mm (2.2")
(35 mm (1.4") to 58 mm (2.3"))
Linerless
Length : 16 mm (0.6") to 120 mm (4.7")
Width : 50 mm (2.0") to 58 mm (2.3")
( ): Inches (") are displayed in
dimensions.
* ( ): Liner size is included.
* ( ): Liner size is included.
* For Linerless media, you should make
the proper settings of the printer to
match your print layout conditions. For
details, contact your SATO reseller or
technical support center.
Basic Specifications
PW208mNX
Media Type : Roll (Face-out)
Dimension : Φ35 mm (1.4") maximum
Core : No
* Use only the supply products specified
by SATO.
Continuous
Length : 13 mm (0.5") to 160 mm (6.3")
(16 mm (0.6") to 163 mm
(6.4"))
Width : 55 mm (2.2")
(58 mm (2.3"))
Tear-off
Length : 16 mm (0.6") to 160 mm (6.3")
(19 mm (0.7") to 163 mm
(6.4"))
Width : 55 mm (2.2")
(58 mm (2.3"))
Linerless
Length : 16 mm (0.6") to 120 mm (4.7")
Width : 58 mm (2.3")
( ): Inches (") are displayed in
dimensions.
* ( ): Liner size is included.
* For Linerless media, you should make
the proper settings of the printer to
match your print layout conditions. For
details, contact your SATO reseller.
Mobile printer PW208NX/PW208mNX
147