Page 1
Push the power button on the control panel until the LED lights up in blue and turn on the printer. An initial icon is displayed at the top of the printer screen, but it is not yet connected with SATO. Please make the following settings to link the printer and use account.
Page 2
1) In order to connect the printer to the wireless LAN, Network setting is configured by using SATO All-In-One Tool Application All-in-One Tool Application download link http://www.satoworldwide.com/software/all-in-one-tool.aspx Wireless LAN configuration by All-In-One Tool Application. http://www.manual.sato-global.com/printer/cl4nx_cl6nx/main/main_GUID-F0688981-C154-440A-B BC0-CDBEF7FCEA0A.html?q=interface%2Bsetting Manual is not for PW208NX. However configuration steps are the same.
Page 3
2) Proxy server (if customer use proxy) In order to set up proxy saver setting for printer, please access the printer through Web config page to set. Please display the web config page and set up the proxy server as follows. (1) Open the browser and enter the URL of this product.
Page 4
(5) Set proxy saver (6) In the setting menu, select →[Network] →[Settings] → [Wi-Fi] →[Proxy] and set the proxy server information 3. Printer settings for SOS Turn on the printer and go to “Online Service” to change SOS mode to Light When you press and hold the button and button simultaneously for 2 seconds or...
Page 5
4. Log in to SOS Smart app select [Add printer] →[Real-time Light] Only for NFC-enabled devices/smartphones running the Android OS or NFC must be enabled on the device/smartphone Touch the NFC of the printer with the Real-time Light” displayed. NFC is installed in the red circle part of the figure below.
Page 6
When NFC reading is completed, the screen changes so enter the device name and installation location with SOS Smart App and tap the Add button. After completing the addition, long press the power button of the printer, turn off the power to restart the printer.
Page 7
However the SOS type is still “On-demand”, The printer is not connected to SOS as Real-time Light yet. So please check the followings ・Network setting, DNS saver and Proxy server. Please refer to the SOS user manual from the following URL for WEB application. https://www.sato-sos.com/en/support/sos_usermanual.pdf...