SATO PW208NX Operator's Manual page 113

Starting Up the Printer
Factory
Tools > Test Print > Factory
To perform the factory test print, the setting items are as follows:
1 Print
2 Pitch
3 Offset
4 Darkness Adjust
Notes
• The values of Pitch, Offset and Darkness Adjust set in the Factory
menu are reflected to the same item settings in the BD Address menu,
Configure List menu, Configure QR menu and Paper Sensor menu.
• The values of Pitch, Offset and Darkness Adjust set in the Factory
menu are reflected to the same item settings in the Adjustment mode
( page 63).
110
Mobile printer PW208NX/PW208mNX
Perform the test print.
To stop the test print, press the
button.
Adjust the print position.
Initial value : 0 dot
Setting range : –30 to 30 dots
Adjust the stop position of media.
Initial value : 0 dot
Setting range : –30 to 30 dots
Fine tune the print darkness of the print.
Initial value : 50
Setting range : 0 to 99 dot
Note
0 is the lightest and 99 is the darkest.
button or