SATO PW208NX Operator's Manual page 104

Head Interval
System > Notifications > Change Head > Head Interval
Set the notification interval about when the print head needs to be replaced.
When the print distance after the counter is reset reaches to the set value, a status
icon for notifications is displayed.
You can change settings only if you have selected Enabled in the Clean Head >
Clean Head.
Initial value : 30 km
Setting range : 1 to 30 km
Note
For details on notifications, see "3.4 Notifications"
Change Platen
System > Notifications > Change Platen
To notify when the platen roller needs to be replaced, the setting items are as follows:
1 Change Enable or disable the notification function about when the
Platen platen roller needs to be replaced.
2 Platen Set the notification interval about when the platen roller needs
Interval to be replaced.
You can change settings only if you have selected Enabled in
the Change Platen > Change Platen.
3 Platen Shows the current distance the platen roller has fed.
Counter You cannot change the setting.
Change Platen
System > Notifications > Change Platen> Change Platen
Enable or disable the notification function about when the platen roller needs to be
replaced.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Enable the notification function.
Disabled : Disable the notification function.
( page 139).
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
101