SATO PW208NX Operator's Manual page 73

Starting Up the Printer
IPv4
Interface > Network > Settings > Wi-Fi > IPv4
To set IPv4 for the wireless LAN, the setting items are as follows:
Mode
1
2 DHCP
3 IP Address
4 Netmask
5 Gateway
6 DNS
Mode
Interface > Network > Settings > Wi-Fi > IPv4 > Mode
Select the IP address assignment method.
This item is not displayed when Wi-Fi Direct is selected.
Initial setting : DHCP
Setting options : DHCP, Static
DHCP
Static
70
Mobile printer PW208NX/PW208mNX
Select the IP address assignment method.
This item is not displayed when Wi-Fi Direct is selected.
You can press button to get the IP address from the
DHCP server.
When Mode is set to DHCP, update the address.
This item is not displayed when Wi-Fi Direct is selected.
Display or set the IP Address.
If you have selected DHCP in the Mode menu or Wi-Fi Direct
is active, the IP address you received from the DHCP server is
displayed on the screen.
If you have selected Static in the Mode menu, set the IP
address.
Display or set the subnet mask address.
If you have selected DHCP in the Mode menu or Wi-Fi Direct
is active, the subnet mask address you received from the
DHCP server is displayed on the screen.
If you have selected Static in the Mode menu, set the subnet
mask address.
Display or set the default gateway address.
If you have selected DHCP in the Mode menu or Wi-Fi Direct
is active, the default gateway address you received from the
DHCP server is displayed on the screen.
If you have selected Static in the Mode menu, set the default
gateway address.
Shows the primary address of the DNS server.
You cannot change the setting.
This item is not displayed when Wi-Fi Direct is selected.
: Automatically retrieve the IP address, gateway and
subnet mask from the DHCP server.
: Manually set the IP address, gateway and subnet mask.