SATO PW208NX Operator's Manual page 65

Starting Up the Printer
Head Chk Mode
Printing > Advanced > Head Chk Mode
Set the head check timing in the head check mode.
This item is displayed only if Head Check is set to All or Barcode.
Initial setting : Always
Setting options : Always, After Batch, Every Page
Always
After Batch
Every Page
Every Page
Printing > Advanced > Every Page
Set the interval to perform head check by specifying the number of media.
This item is displayed only if Head Chk Mode is set to Every Page.
Initial value : 1
Setting range : 1 to 9999
Chk Media size
Printing > Advanced > Chk Media size
Enable or disable media size check.
The Media size check function detects a media longer than the media size specified
by command, or the print data larger than the loaded media length.
This item is displayed only if Sensor Type is set to Gap or I-Mark.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled: Enable the Chk Media size function.
Disabled: Disable the Chk Media size function.
62
Mobile printer PW208NX/PW208mNX
: Perform the head check for every item.
: Perform the head check when the printer starts and ends
printing. If backfeed is applicable, the printer performs the
head check at the beginning and end of printing and during
the backfeed.
: Perform the head check for each specified number of
media.