Proxy
Interface > Network > Settings > LAN > Proxy
To set the proxy for the LAN, the setting items are as follows:
1
Enabled
Enable or disable use of proxy.
2
Server
Shows the proxy server address information.
You cannot change the setting.
3
Exclude
Shows the address to be excluded from the proxy usage.
You cannot change the setting.
WPS
Interface > Network > Settings > Wi-Fi > WPS
To set the wireless LAN connection using the push button or PIN code method, the
setting items are as follows:
This item is not displayed when Wi-Fi Direct is selected.
1
Button (PBC)
Set the wireless LAN connection using the push button
method.
2
PIN
Set the wireless LAN connection using the PIN code method.
Note
Refer to the manual of the wireless LAN access point device for its
operation.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
73