Details Of The Settings Menu Screen; Printing Menu - SATO PW208NX Operator's Manual

Starting Up the Printer

2.6 Details of the Settings Menu Screen

2.6.1 Printing Menu

In the Printing menu, the setting items are as follows:
Printing
1 Label Length
2 Label Width
3 Auto Measure
4 Speed
5 Print Mode
6 Sensor Type
7 Peeling Setting
(PW208NX only)
8 DarknessRng
9 Darkness
10 Imaging
11 Advanced
Note
The printer uses the unit of dot to set the length and size of print
reference position. One dot length is 0.125 mm.
Label Length
Printing > Label Length
Set the length of media.
Initial value : 1760 dots
Setting range : 1 to 8000 dots
Note
Set the label size to a value that includes the liner.
Label Width
Printing > Label Width
Set the width of media.
Initial value : 440 dots
Setting range : 1 to 440 dots
Note
Set the label size to a value that includes the liner.
50
Mobile printer PW208NX/PW208mNX
Set the length of media.
Set the width of media.
When enabled, the length of media is measured
automatically.
Set the maximum print speed.
Set the print mode.
Set the media sensor type.
Set the peeling motion in the Dispenser mode.
Set the range of the print darkness.
Set the print darkness.
Set the print reference position in the vertical and
horizontal directions.
Set the sensor operation and print motion.