SATO PW208NX Operator's Manual page 118

Buffer Dump
Tools > HEX-Dump > Buffer Dump
Save the receive buffer data to the buff/ folder of the printer.
Buffer dump is available only if you have set the Hex Dump Mode to Disabled.
Notes
• The data files of the receive buffer are created for each type of
interface.
• The details of the file created inside buff/ are as follows:
• BT0001.bin: Received data through Bluetooth.
• WIFI0001.bin: Received data through wireless LAN.
• USB0001.bin: Received data through USB.
• If you perform the Buffer Dump again, the existing file is overwritten.
• You can print or delete files from the Log Files menu.
Log Files
Tools > HEX-Dump > Log Files
To manage the files of the received data created in the HEX-Dump mode and Buffer
Dump, the setting items are as follows:
1 Remove Delete the files of the received data.
2 Print Print files of the received data.
Remove
Tools > HEX-Dump > Log Files > Remove
Delete the files of the received data as follows:
1. Select the file type you want to delete.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file you want to delete.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
115