SATO PW208NX Operator's Manual page 66

Adjustments
Printing > Advanced > Adjustments
To set the adjustments mode, set the following items.
1 Offset
2 Pitch
3 Darkness Adjust
Note
The values for Offset and Pitch specified in the Adjustments are
reflected in the relevant setting items in Test Print
Offset
Printing > Advanced > Adjustments > Offset
Adjust the stop position.
The stop position refers to the tear-off position, cut position and dispenser stop
position.
Set an offset value + to move the print position opposite the feed direction and value –
to move the print position in the feed direction.
Initial value : 0 dot
Setting range : –30 to 30 dots
Pitch
Printing > Advanced > Adjustments > Pitch
Move the print position in the vertical direction.
Set an offset value + to move the print position opposite the feed direction and value –
to move the print position in the feed direction.
Initial value : 0 dot
Setting range : –30 to 30 dots
Set the offset position.
Set the print position.
Fine tune the print darkness of the print.
(pages 108 to
Media feed direction
（ー）
ABC
（＋）
Starting Up the Printer
113).
Mobile printer PW208NX/PW208mNX
63