SATO PW208NX Operator's Manual page 98

Character Pitch
Applications > SBPL > Compatible > Character Pitch
Set the valid range in specifying a pitch between characters (ESC+P).
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : The valid range in specifying pitch between characters (ESC+P)
is valid until you make a next character pitch setting.
Disabled : The character pitch setting (ESC+P) is canceled and reset to
the initial setting when next character is input or a barcode is
specified.
SZPL
Applications > SZPL
To use SZPL as the printer command, set the following items:
1 Label
2 Caret
3 Delimiter
4 Tilde
5 Clock Format
6 Default Font
Label
Applications > SZPL > Label
Set the print position.
The setting items are as follows:
1 Shift
2 Top
Shift
Applications > SZPL > Label > Shift
Set the shift offset position of the label.
The setting range varies depending on the print resolution of the printer.
Initial value : 0
Setting range : –440 to 0 to +440 dots
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
95