Exporting Data - Leica LS10 User Manual

13.2
Description
Access
Select Export
Details
LS10/LS15, Data Management

Exporting Data

Job data, format files, configuration sets and codelists can be exported from the
internal memory of the instrument. Data can be exported to:
1) Internal memory
The selected database content is translated into a readable ASCII, GSI or XML file and
stored in the internal memory of the instrument. If you connect the instrument to a
PC through Active Sync/Mobile Device Centre, you can copy these files to the PC by
drag and drop.
2) USB Memory Stick:
The selected database content is translated into a readable ASCII, GSI or XML file and
stored on the USB memory stick that is inserted into the USB interface.
3) RS232 or Bluetooth Interface:
The selected database content is translated into a readable ASCII, GSI or XML file and
send to an external receiver (e.g. a PC) using the RS232 or bluetooth interface.
To receive the data, the receiver needs to be equipped with a third party receiving
program.

If the receiver cannot process the data fast enough or if the connection to the
receiver is unstable, the exported data could be lost. Note, that for this type
of data transfer no protocol check exists.
1) Select Transfer from the Main Menu.
2) Select
Export.
Field Description
To Destination of the exported data:
• Internal Memory
• USB Stick
• Interface (RS232, Bluetooth)
Data type to be transferred:
Data Type
To Internal Memory, USB Stick or Interface: Measurements,
Fixpoints, Meas.& Fixpoints
Only to USB Stick: Code, Format, Backup
Select whether to export all job-related data or a single job data file.
Job
Displays the selected job.
Select Job
79