Interface Settings - Leica LS10 User Manual

6.6
Description
Access

Interface Settings

LS10/LS15, Settings
Interface Settings
For data transfer, you need to set the communication parameters of the instrument:
• For serial data communication (e.g. Data import/export, GSI/Geocom commanding),
select either RS232 (only LS15) or Bluetooth.
• For file transfer communication (Active Sync/Mobile Device Centre), select Mini
USB or Lemo USB (only LS15).

For USB connections, serial communication is not supported.
1. Select Settings from the Main Menu.
2. Select Interface from the Settings Menu.
For LS10:
Field Description
Port : Instrument port.
Mini USB
Bluetooth
Bluetooth: Active
Inactive
For LS15:
Field Description
Port : Instrument port.
Mini USB
Bluetooth
RS232
Lemo USB
Bluetooth: Active
Inactive
The following fields are active only when Port : RS232 is set.
Speed of data transfer from receiver to device in bits per second.
Baud rate:
1'200, 2'400, 4'800, 9'600, 14'400, 19'200, 38'400, 57'600, 115'200
Number of bits in a block of digital data.
Data bits:
7
8
BT-PIN
To set a PIN code for the Bluetooth
connection.

The default Bluetooth PIN is
'0000'.
Default
To reset the fields to the default inter-
face settings. Available, if RS232 is
selected as instrument port.
Communication is via the Mini-USB port.
Communication is via Bluetooth.
Bluetooth sensor is activated.
Bluetooth sensor is deactivated.
Communication is via the Mini-USB port.
Communication is via Bluetooth.
Communication is via the serial interface.
Communication is via the Lemo-USB port.
Bluetooth sensor is activated.
Bluetooth sensor is deactivated.
Data transfer is realised with seven data bits.
Data transfer is realised with eight data bits.
41