Data Settings - Leica LS10 User Manual

6.3
Description
Access

Data Settings

LS10/LS15, Settings
Data Settings
In the Data Settings screen, you can define different options for measurement data,
such as sort order of points within point search or location for data storage.
1. Select Settings from the Main Menu.
2. Select Data from the Settings Menu.
3. Press the page key
Field Description
Record
Sort Type Time
PtID
Sort Order Descending
Ascending
Code Record Defines whether the code block is saved before or after the meas-
urement. Refer to "9 Coding".
Defines whether the code is used for one or for many measurements.
Code
Reset after Rec The set code is cleared from the measurement
Permanent
Output
Data Output Sets the location for data storage.
Internal
Memory
Interface
Sets the GSI output format.
GSI-Format
GSI 8
GSI 16
to scroll through the screens of available settings.
Lists are sorted by time of entry.
Lists are sorted by Point IDs.
Lists are ordered in descending order of sort type.
Lists are ordered in ascending order of sort type.
screen after the measurement has been recorded.
The code is only applied to this single measurement.
The set code remains in the measurement screen
until you delete it manually. The code is applied to
all further measurements.
All data is recorded in the internal memory.
All recorded data is sent to a connected computer,
either through Bluetooth or serial interface. Select
the respective interface in the Interface Settings
screen
81..00+12345678
81..00+1234567890123456
37