4.2
Description
4.3
Tripod
LS10/LS15, Operation
Data Storage
The instrument is equipped with an internal memory. In the internal memory, all data
is stored within jobs in the database. From the database, you can transfer or export
the data and convert it into a readable format (e.g. ASCII, HexML, GSI) by using the
transfer functionality.
For further information on data management and data transfer refer to "13 Data
Management".
Instrument Setup
For highest accuracy levelling tasks, use a tripod with fixed legs, for example 328422
GST40.
TSOX_012b
a
b
TSOX_012a
TSOX_012c
When setting up the tripod pay attention to
ensuring a horizontal position of the tripod
plate. Slight corrections of inclination can
be made with the foot screws of the
tribrach. Larger corrections must be done
with the tripod legs.
Loosen the clamping screws on the tripod
legs, pull out to the required length and
tighten the clamps.
a) In order to guarantee a firm foothold
sufficiently press the tripod legs into the
ground.
b) When pressing the legs into the ground
note that the force must be applied along
the legs.
Careful handling of tripod.
• Check all screws and bolts for correct fit.
• During transport, always use the cover
supplied.
• Use the tripod only for surveying tasks.
23