Pointsearch - Leica LS10 User Manual

7.1.2
Description
Direct Search
Wildcard search
Examples of point
searches
LS10/LS15, Programs

Pointsearch

Pointsearch is a function used by programs to find measured points or fixpoints in the
memory storage.
It is possible to limit the point search to a particular job or to search the whole storage.
The search procedure always finds fixpoints before measured points that fulfil the
same search criteria. If several points meet the search criteria, then the results are
ordered according to the entry date. The instrument finds the most recent fixpoint
first.
You can search directly for fixpoints by entering a specific point ID:
1) Select a specific job or the option All Jobs.
2) Enter a specific point ID and press the ENTER key.
3) Press Find to start the point search.
All points within the selected job and with the corresponding point ID are found. Use
the Navigation keys to toggle through the found point IDs.
The wildcard search is indicated by a "*". The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is not
fully known, or to search for a batch of points.
* All points are found.
A All points with exactly the point number "A" are found.
A* All points starting with "A" are found, for example, A9, A15, ABCD, A2A.
*1 All points containing only one "1" are found, for example, 1, A1, AB1.
A*1 All points starting with "A" and containing only one "1" are found, for example,
A1, AB1, A51.
Find
To search for matching points within
the selected job.
ENH
To create a point and enter its coordi-
nates.
44