7.4.2
Description
Select Job
Recorded Data
LS10/LS15, Programs
Setting a Job
All data is saved in Jobs, like file directories. Jobs contain measurement data of
different types, for example measurements, codes, fixpoints or stations. Jobs are indi-
vidually manageable and can be exported, edited or deleted separately.
Field
Description
Name of an existing job.
Job
Name of operator (optional).
Operator
Remark 1,
Additional remarks (optional).
Remark 2
Date on which the selected job was created.
Date
Time at which the selected job was created.
Time
How to Set an Existing Job
• Use the navigation keys to select an existing job.
• To continue with the selected job, press Cont.
How to Create and Set a New Job
• Press New to open the Enter Job Data screen.
• Enter the required job data.
• To return without saving the entered data, press Back.
• To save the entered job data and return to the previous screen, press Cont.
• To continue with the created job, press Cont.
Once you saved the entered job data, you cannot change it anymore.
Once a job is set up, all subsequent recorded data will be stored in this job.
If no job is defined and you start a program, or if you record a measurement
within Q-Level, the system automatically creates a new job and names it
"Default".
Delete
To delete an existing job.
New
To create a job.
54