Leica LS10 User Manual page 60

Closing a Line
LS10/LS15, Programs
Station Result Screen
Check Screen
To select a fixpoint from the available list of fixpoints, press the softkey List.
After completing all measurement of a station you can compare the height of the last
point of a line with a known fixpoint and calculate the misclosure. Press the softkey
Close to start the caculation of the line end.
Line Info Screen
Station Dif.: Station difference.
Station Dif.: Accumulated station differ-
ence.
delta Height: Height difference between
backsight and foresight.
Height FS: Height of the foresight point.
Station Dist: Distance measured on this
station (backsight + foresight).
B1-B2: Difference between the two back-
sight height measurements.
F1-F2: Difference between the two fore-
sight height measurements.
Last Point: Point ID of the last measured
point.
Height LastPt: Height of the last measured
point.
Fix Point: Point ID of the selected fixpoint.
Height Fix Pt: Height of the selected
fixpoint.
Difference: Height difference between
measured point and fixpoint.
Line ID: Line ID.
No. Station: Number of stations.
Total dH: Total height difference.
Total Dist: Accumulated distances.
Dist Balance: Distance difference ( sum B
- sum F) at the current station of the line.
60