Leica LS10 User Manual page 40

LS10/LS15, Settings
Field Description
Mean S Enter a minimum and a maximum number of measurements
(n = 2...99) and a maximum standard deviation.
Starting with the minimum number of measurements, the
instrument checks if the measured standard deviation is less or
larger than the entered maximum standard deviation.
• If the deviation is less or equal, the instrument stops meas-
• If the deviation is larger, the instrument continues measuring
Example:
Measured distance = 60 m, sDevM/20 m = 0.0007 m,
S = sDevM/60 m = 0.0021 m
The maximum allowable standard deviation at 60 m is 0.0021 m.

Enter the number of measurements to be made (n = 2...99).
Median
• Uneven number of measurements: The instrument calculates
• Even number of measurements: The instrument calculates
Tracking The instrument continuously takes single measurements until
you end the procedure.
uring.
until the maximum number of measurements is reached. At
each step, the instrument checks whether the maximum
standard deviation can be reached by eliminating outliers.
For n Min. = n Max., no measurements are discarded by
the outlier test.
the Median of all measurements by using the central value.
the Median of all measurements by using the two central
values.
Press RecCont to save the last valid
measurement data.
Press EndTrck to stop the measure-
ments without saving data.
40